Altronix ALTV615DC8UL3 Installation Instructions Manuel d'utilisateur télécharger pdf

Overview:

The Altronix ALTV615DC8UL CCTV Power Supply is designed with eight (8) individually fused power limited, Class 2

Rated outputs for powering CCTV Cameras and other video accessories. It will provide 6VDC-15VDC distributed via

eight (8) fused outputs with a total of up to 4 amp continuous supply current.

Specifications:

Agency Listings:

• UL Listed for Commercial Closed-Circuit Television Equipment (UL 2044).

•

CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video and Similar Equipment.

Input:

• Input 115VAC 50/60 Hz, .9 amp.

Output:

• 6VDC-15VDC adjustable output.

•

Eight (8) individually fuse protected power limited,

Class 2 Rated outputs.

• 4 amp total continuous supply current.

• Filtered and electronically regulated outputs.

Fuse Ratings:

• Output fuses are rated at 3.5 amp/250VAC (Fig. 1).

Visual Indicators:

• AC input and DC output LED indicators.

Additional Features:

• Spare fuses included.

• Unit maintains camera synchronization.

• Ease of installation saves time and eliminates costly labor.

Enclosure Dimensions:

13.5"H x 13"W x 3.25"D

Note: Add suffix “3” for 3-wire line cord

(e.g. ALTV615DC8UL3) and disregard

installation instruction number two (2).

Installation Instructions:

1. Mount ALTV615DC8UL in desired location.

2. Connect green lead to earth ground. Connect AC (115VAC 50/60 Hz) to the black and white flying leads of the

transformer (Fig. 1). Use knockout adjacent to the transformer 1/4” spacing must be pro

vided between AC input

wiring and all other circuits.

3. Adjust output voltage using trimpot on the board prior to connecting CCTV devices.

4. Measure output voltage before connecting devices. This helps avoid potential damage.

Terminals marked [1P-8P] are positive (+) and terminals marked [1N-8N] are negative.

CAUTION: Determine the maxim

um operating voltage of the equipment being powered before adjusting the

output voltage.

5. Connect each DC CCTV cameras to terminal pairs marked [1P-1N thru 8P-8N] on PD8 board carefully

obser

ving correct polarity (Fig. 1).

6. Green LED will illuminate w

hen when unit is powered.

7. Upon completion of wiring, secure enclosure door with screws (supplied).

Keep power limited circuits (outputs 1 through 8) away from non-power limited, 1/4” space must be provided.

Use separ

ate knockouts.

Caution: Equipment to be installed / serviced by authorized / trained personnel only.

Shut branch circuit power before installing / servicing equipment.

ALTV615DC8UL

CCTV Camera & Accessory Power Supply

Rev. 042806

Wire

Strap

(from

Enclosure

to Door)

+ DC OUTPUT ---

--- B AT +ACAC

COMMON POWER OUTPUTS

FUSED POWER OUTPUTS

1 2 3 4 5 6 7 8

INPUT

LED

XFMR

Black

Lead

White

ead

Green

Lead

15VAC input

50/60 Hz,

9 amp

on power-

limited

Voltage

Adjustment

se separate

knockouts for

power-limited

circuits.

Class 2 Not Wet/

lass 3 Wet

Fig. 1

1 2

ALTV615DC8UL 1
RightLeft 2

Résumé du contenu

Page 1 - ALTV615DC8UL

Overview:The Altronix ALTV615DC8UL CCTV Power Supply is designed with eight (8) individually fused power limited, Class 2Rated outputs for powering CC

Page 2 - RightLeft

Altronix is not responsible for any typographical errors.140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056web site: www.a

Commentaires sur ces manuels

Pas de commentaire

Altronix ALTV615DC8UL3 Installation Instructions Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour les appareils électriques Altronix ALTV615DC8UL3 Installation Instructions. Altronix ALTV615DC8UL3 Installation Instructions User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour les appareils électriques Altronix ALTV615DC8UL3 Installation Instructions