Altronix ACM8CB Data Sheet Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour les appareils électriques Altronix ACM8CB Data Sheet. Altronix ACM8CB Data Sheet User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
ACM8CB
Multi-Output Access Power Controllers
Rev. DSACM8CB_11052012
ACM8CB converts one (1) 12 to 24 volt AC or DC input into eight (8) indepen-
dently controlled PTC protected outputs. These power outputs can be converted
to dry form “C” contacts. Outputs are activated by an open collector sink or nor-
mally open (NO) dry trigger input from an Access Control System, Card Reader,
Keypad, Push Button, PIR, etc. The ACM8CB will route power to a variety of
access control hardware devices including Mag Locks, Electric Strikes, Magnetic
Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure
modes.
This unit is designed to be powered by one common power source which will
provide power for both the board operation and locking devices, or two (2) totally
independent power sources, one (1) providing power for board operation and the
other for lock / accessory power. The FACP Interface enables Emergency Egress,
Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire
alarm disconnect feature is individually selectable for any or all of the eight (8)
outputs.
Overview
Specifications
ACM8CB
Agency Approvals
UL Listed Sub-Assembly for Access Control System Units (UL 294) and
“Signal Equipment” Evaluated to CSA Standard C22.2 No.205-M1983.
Input:
• 12to24voltACorDCoperation
(setting not required), (0.6 amp @ 12volt,
0.3 amp @ 24 volt current consumption with all
relays energized).
• Powersupplyinputoptions:
a) One (1) common power input
(board and lock power).
b) Two (2) isolated power inputs (one (1) for
board power and one (1) for lock/accessory power).
• Eight(8)AccessControlSystemtriggerinputs:
a) Eight (8) normally open (NO) inputs.
b) Eight (8) open collector sink inputs.
c) Any combination of the above.
Output:
• Eight(8)independentlycontrolledoutputs:
a) Eight (8) Fail-Safe and/or Fail-Secure
power outputs.
b) Eight (8) dry form “C” 5 amp rated relay outputs
c) Any combination of the above
• Eight(8)auxiliarypoweroutputs(unswitched).
• Outputratings:
- PTCs are rated 2.5 amp each.
• Mainfuseisratedat10amp.
Note: Total output current is determined by the power
supply, not to exceed a maximum of 10 amp total.
Features:
• FireAlarmdisconnect(latchingornon-latching)is
individually selectable for any or all of the
eight (8) outputs.
FireAlarmdisconnectinputoptions:
a) Normally open (NO) or normally closed (NC)
dry contact input.
b) Polarity reversal input from FACP
signaling circuit.
• FACPoutputrelay(form“C”contactrated@1amp
28VDC not evaluated by UL).
• Removableterminalblocksfacilitateease
of installation.
Visual Indicators:
• RedLEDsindicateoutputsaretriggered
(relays energized).
• GreenLEDindicatesFACPdisconnectistriggered.
Electrical:
• Operatingtemperature:0ºCto49ºCambient.
• BTU/Hr.:
- 12VDCor12VAC:3.68BTU/Hr.
- 24VDCor24VAC:3.68BTU/Hr.
Mechanical:
• BoardDimensions(LxWxHapprox.):
8” (203.2mm) x 4.5” (114.3mm) x 1.25” (31.75mm)
• Productweight(approx.):1.48lbs.(0.67kg).
• Shippingweight(approx.):1.5lbs.(0.68kg).
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Rev. DSACM8CB_11052012

ACM8CBMulti-Output Access Power ControllersRev. DSACM8CB_11052012ACM8CB converts one (1) 12 to 24 volt AC or DC input into eight (8) indepen-dently co

Page 2 - Mounting Diagram

 AltronixCorp.-14058thStreet,Brooklyn,NY11220•718-567-8181•888-258-7669•altronix.comBoard Dimensions (L x W x H) (approximate)8” (203.2

Commentaires sur ces manuels

Pas de commentaire