Altronix NetWay16M Guide d'installation télécharger pdf (Page 6)

- 6 - NetWay8M/NetWay16M

NetWay8M/NetWay16M User Interface and Programming:

Note: A constant PC connection is not required for proper operations and is used as a local programming/monitoring tool only.

Step1.SetLocalAreaConnectionofyourlaptoptoStaticIPmode.

   StaticIPaddressofthelaptopmustbeassignedtothesamenetworkasthecurrentIPaddressofNetWay8M/ 

NetWay16M. The default IP address of NetWayM units is 192.168.168.168. This manual assumes that it has not

been changed by user.

For Windows XP:

  a.OpenNetworkConnectionsbyclickingStartbutton,thenclickingSettings,thenclickingNetwork Connections.

  b.RightclicktheLocal Area Connection.ClickProperties. Administrator permission required

If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

  c.DoubleclickInternet Protocol (TCP/IP) menu item.

d. Choose the Use the following IP address option.

  e.SettheIPaddressto192.168.168.15(oranothervalidIPaddressonthesamenetwork).

  f. ClickOK. Close all windows.

For Windows 7:

  a.OpenNetworkConnectionsbyclickingtheStartbutton,clickingControl Panel,clickingNetwork and Internet,

   clickingNetwork and Sharing Center,andthenclickingChange Adapter Settings.

  b.RightclicktheLocal Area Connectionicon,andthenclickProperties. Administrator permission required.

If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

  c.ClicktheNetworkingtab.Underthisconnectionusesthefollowingitems,clickeitherInternet Protocol Version 4

   (TCP/IPv4)andthenclickProperties.

d. Choose the Use the following IP address option.

  e.SettheIPaddressto192.168.168.15(oranothervalidIPaddressonthesamenetwork).

  f. ClickOK. Close all windows.

Step2.ConnectalaptoporPCtotheEthernetportofyourNetWayMunit.

The NetWayM unit should be powered up at this moment.

Step3.Openabrowserwindow(itisnecessarytoupdateyourbrowsersoftwaretothelatestversionsothatthepages 

display and function correctly).

Step4.EntertheNetWayMIPaddress(thedefaultIPaddressis192.168.168.168)intotheaddressbar.

   Statuspagewillbedisplayed.

Step5.ClickSetuplink.Setuppagewillbedisplayed.YoumaynowprogramyourNetWayM.

All NetWayM units come factory set:

a. Ports - Enabled.

   b.Ports-PoEshutdownDisabled.

c. Power Allocation Mode - Class restricted.

Port Priority:

NetWayM allows you to prioritize ports so that power will be allocated to the port with the highest priority first and the

lowest priority last. This will ensure that ports with the higher priority will continue to operate in the event the

NetWayM is overloaded. Priority is designated 1 through 8, with 1 as the highest and 8 as the lowest.

NetWay8M - Port priority is factory set at 1 through 8 for ports 1 through 8.

NetWay16M - Port priority is factory set at 1 through 8 for ports 1 through 8 and 1 through 8 for ports 9 through 16.

1. To reassign port priority select desired number from the drop down box for that corresponding port.

It is necessary to assign the port with the highest priority first and continue in ascending order.

2. ClickSubmit to save the changes or proceed with programming.

Note: Access Control Ports must have highest priority.

Port Identification:

NetWayMallowsyoutoidentifyeachport(IDupto8characters).

1. TypethedesiredIDintothetextboxforeachcorrespondingport.

2. ClickSubmit to save the changes or proceed with programming.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Altronix NetWay16M Guide d'installation Page 6

Commentaires sur ces manuels