Altronix PD4UL Installation Instructions Manuel d'utilisateur télécharger pdf

Overview:

The PD4UL is a UL Listed Sub-Assembly power distribution module, designed to convert a single DC input into

four (4) individually fuse protected outputs.

Specifications:

INPUT

1P 1N 2P 2N

LED

1P, 2P, 3P, 4P = FUSED OUTPUTS

1N, 2N, 3N, 4N = COMMON OUTPUTS

3P 3N 4P 4N

F2 F3 F4

NPS

Positive (+)

Input

Negative ( --- )

Input

PD4UL

POWER DISTRIBUTING UNIT

Fire Alarm System Power Supply Unit

Also suitable for use as a

Access Control System Unit Subassembly.

9B98

Refer to Installation Instructions

IIPD4UL - REV. 030802

Fig. 1

(#P) Positive DC outputs

(#N) Negative DC outputs

Note: DC outputs are power limited only if

power limited power supply is employed.

Caution: To avoid risk of electric shock

or fire hazard replace fuses with the same

type and rating, 3.5 amp/250V.

Do not expose to rain or moisture.

PD4UL - UL Listed Sub-Assembly

Power Distribution Module

Altronix is not responsible for any typographical errors.

140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056

website: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.

IIPD4UL - Rev. 051311 E13K

Agency Listings:

• ULListedSub-AssemblyforAccess

Control System Units (UL 294) and

for Power Supplies for Fire Protective

Signaling Systems (UL 1481).

Input:

• 12VDCor24VDCupto10amp.

Outputs:

• Four(4)individuallyfuseprotectedoutputs@2.5amp

per output max. current (total output current should not

exceed max. current rating of power supply employed).

Fuse Ratings:

• Fusesarerated@3.5A/250V.

Visual Indicators:

• PowerongreenLEDindicator.

Board Dimensions (approximate):

5.25”L x 3.25”W x 1”H

Installation Instructions:

WiringmethodsshallbeinaccordancewiththeNationalElectricalCode/NFPA70/NFPA72/ANSI,andwithalllocal

codes and authorities having jurisdiction. Product is intended for indoor use only and should be installed

by qualified personnel.

1. Refer to Sub Assembly Installation Instruction for mounting Rev. MS042511.

2. Connect the desired power supply output to terminals marked [INPUT] (Fig. 1).

Note: Left terminal is NEG. (-) and right terminal is POS. (+) (Fig. 1).

3. Measure output voltage before connecting devices. This helps avoid potential damage.

4. Connect devices to be powered to terminal pairs 1 to 4, marked [1P - 1N thru 4P - 4N]. All terminals with common

suffix P “1P, 2P...” are same polarity.

Note: This product is a UL Listed Sub-Assembly for use with Altronix UL Listed power supplies

as indicated in the installation manuals for the power supply.

MEMBER

TED

URITY

SIGNALING

Power Distribution Module 1

Résumé du contenu

Page 1 - Power Distribution Module

Overview:The PD4UL is a UL Listed Sub-Assembly power distribution module, designed to convert a single DC input intofour (4) individually fuse protect

Commentaires sur ces manuels

Pas de commentaire

Altronix PD4UL Installation Instructions Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour les appareils électriques Altronix PD4UL Installation Instructions. Altronix PD4UL Installation Instructions User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour les appareils électriques Altronix PD4UL Installation Instructions