Altronix Maximal3RD Data Sheet Manuel d'utilisateur télécharger pdf

Maximal3RD rack mount access power controller distributes and switches

power to access control systems and accessories. It converts a 115VAC 50/60Hz

input into sixteen (16) independently controlled 12VDC or 24VDC PTC pro-

tected outputs. Outputs are activated by an normally open (NO) or normally

closed (NC) dry trigger input from an Access Control System, Card Reader,

Keypad, Push Button, PIR, etc. This unit will route power to a variety of access

control hardware devices including: Mag Locks, Electric Strikes, Magnetic

Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure

modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or

may be used to trigger other auxiliary devices. The fire alarm disconnect feature

is individually selectable for any or all of the outputs.

Input:

• 115VAC60Hz.,1.9amp.

• Normallyclosed[NC]ornormallyopen[NO]

dry contact inputs (switch selectable).

Outputs:

• 12VDCor24VDC@6amptotaloutputcurrent.

• Sixteen(16)PTCprotectedoutputs.

• MaximumcurrentperACM8R-Moutputis2amp.

• IndividuallyselectableMagLock/Strike(Fail-Safe,

Fail-Secure) solid state fuse protected outputs.

• Thermalandshortcircuitprotectionwithautoreset.

Fire Alarm Interface:

• LatchingorNon-Latchingfirealarmresetswitch

individually selectable for each output.

• RemoteresetcapabilityforlatchingFireAlarm

Interface mode.

• FireAlarmdisconnectinputoptions:

 a) Normallyopen[NO]ornormallyclosed[NC]

dry contact input.

b) Polarity reversal input from FACP signaling

circuit.

Visual Indicators:

• IndividualOutputStatusLEDslocatedonthe

front panel.

Battery Backup:

• Built-inchargerforsealedleadacidorgeltype

batteries (if batteries are required install

separate enclosure).

• Maximumchargecurrent0.7amp.

• Automaticswitchovertostand-bybattery

when AC fails.

• Zerovoltagedropwhenunitswitchesovertobattery

backup (AC failure condition).

Supervision:

• ACfailsupervision(form“C”contact).

• Lowbatteryandbatterypresencesupervision

 (form“C”contact).

Additional Features:

• Removableterminalblockswithlockingscrewflange.

• 3-wirelinecord.

• Illuminatedmasterpowerdisconnectcircuitbreaker

with manual reset.

Mechanical:

• Dimensions(HxWxD)(approx.):3.25”(82.55mm)x

19.125”(485.78mm)x8.5”(215.9mm)

• Shipping Weight (approximate):12.7lbs(5.76kg).

Maximal3RD

Rack Mount Access Power Controller

Rev. DSMaximal3RD - 11012012

Overview

Specifications

Maximal3RD

1 2

Maximal3RD 1
TOP & BOTTOM 2

Résumé du contenu

Page 1 - Maximal3RD

Maximal3RD rack mount access power controller distributes and switches power to access control systems and accessories. It converts a 115VAC 50/60Hz i

Page 2 - TOP & BOTTOM

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.comFRONTTOP & BOTTOMREARMaximal3RD Rack Chassis Dime

Commentaires sur ces manuels

Pas de commentaire

Altronix Maximal3RD Data Sheet Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour les appareils électriques Altronix Maximal3RD Data Sheet. Altronix Maximal3RD Data Sheet User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour les appareils électriques Altronix Maximal3RD Data Sheet