The eBridge1CR - IP over Coax receiver is designed for use with eBridge1CT to
enable fast 10/100Base-T Ethernet digital communication over coax cable. This
plug and play unit facilitates system upgrades from analog to IP cameras/devices
utilizing existing legacy Coax and eliminating the costs and labor associated with
installing new network cabling. In addition data transmission is extended to 2,000’
(over five times the 100m/328’ Ethernet maximum length), eliminating the need for
repeaters. eBridge units will transmit Composite Video Signal with Ethernet data
simultaneously.
Input:
• 12VDCto24VDCClass2powersupply(polaritynot
observed)or16VACto24VACClass2plug-in
transformer.
Power Consumption:
• 12VDC/275mA,24VDC/110mA,
16VAC/375mA,24VAC/200mA.
Compliant:
• Incorporates*sloc
TM
(Security Link over Coax)
technology.
Ethernet:
• Connectivity:RJ45,auto-crossover.
• Wiretype:4-pairCAT-5orbetterstructuredcable.
• Distance:upto328ft.(100m).
• Speed:10/100BaseT, half/full duplex, auto negotiation.
• Throughputisratedtopass25mbpsofdataat
distancesupto1500ft.Withproperheadend
equipment, multiple Megapixel cameras can be used.
Coax:
• Distance:upto1,500ft.
• Connectivity:BNC,RG-59/Uorsimilar.
LED Indicators:
• BlueLED-Coaxlinkconnection.
• YellowandGreenLED(RJ45)IPLinkstatus,
10/100Base-T/active.
• GreenLED-Power.
Environmental:
• OperatingTemperature:14ºFto122ºF
(---10ºCto+50ºC).
• StorageTemperature:
--22ºto158ºF(---30ºto+70ºC)Storage.
• Humidity:20to85%,non-condensing.
Electrical:
• BTU/Hr.:
- VDC:1.69-4.46BTU/Hr.
Electrical (cont’d):
- VAC:2.46-3.07BTU/Hr.
Accessories:
• Compositevideocable(included)-enables
simultaneous composite video signal over the
same Coax.
• Powerconnector.
Applications:
• RetrofitdigitalIPcamerasinananalogCCTV
installation.
• WorkswithMegapixel,HD720,HD1080andVGA
(SD)cameras.
• ExtendNetworklinkdistanceinanindustrial
environment.
• UpgradedeployedCCTVCoaxtoadigitalnetwork
for Retail, Casinos, Airports, Schools, Hospitals, etc.
• Enablessimultaneoustransmissionofcompositeand
digital IP video.
Mechanical:
• Lightweightmoldedfiberglassreinforcedpolyester
enclosure is corrosion resistant and does not contain
halogens.
• Dimensions(WxLxHapprox.):
2.5”x3.8”x1”(63.5mm x 96.52mm x 25.4mm)
• Productweight(approx.):3.4oz.(0.10 kg.).
• Shippingweight(approx.):5.4oz.(0.15kg.).
Additional eBridge models:
• eBridge1CT: Single port ethernet transceiver
(use with eBridge receivers).
• eBridge1CRT: Single port ethernet receiver and
transceiver kit.
• eBridge4CR:Four(4)portethernetreceiver.
• eBridge16CR: Sixteen (16) port ethernet receiver.
eBridge1CR - IP over Coax Receiver
Rev.DSeBridge1CR_08012013
Overview
eBridge1CR
Specifications
*slocisaregisteredtrademarkofIntersilCorporation.
Agency Approvals
UL/CULListedforInformation
TechnologyEquipment(UL60950-1).
European Conformity
C-Tick Compliant
Z1409
Commentaires sur ces manuels